How to Inspect the Installation Quality of A Belt Type Concrete Mixing Plant?

The installation quality of a belt - type concrete mixing plant can be inspected from the following aspects: Foundation Section Appearance and Dimensions Check that the surface of the foundation should be flat, free from obvious cracks, honeycombing, and pitting. Measure the length, width, height of the foundation and the position dimensions of each embedded part, which should be in line with the design drawings, and the dimensional deviation should be within the allowable range. Strength and Bearing Capacity Review the strength report of the foundation concrete, and its strength should meet the design requirements. If necessary, equipment such as a rebound hammer can be used to test the strength of the foundation concrete. Meanwhile, check whether the soil around the foundation is well - compacted to avoid foundation settlement caused by soft soil. Levelness and Flatness Use a level gauge to measure the levelness of the foundation. The overall levelness deviation of the foundation should not exceed the specified value. For the flatness of the foundation surface, a straightedge and feeler gauge can be used for inspection to ensure...